فارسی
Wood Coatings
Wood NC Putty
White-1019 & Red Oxide-1319
One-component NC Putty levels out the uneven wood surfaces.
Features
  • Fast-drying
  • Excellent sanding
  • Good adhesion on wood surfaces
 
 
Wood NC Sealer 200
One-component sealer levels out uneven surfaces. Application method is conventional spray.
Features
  • Offers a smooth and transparent surface, through which the wood texture can be seen
  • Excellent sanding
  • Fast-drying
 
 
Wood NC Clear Coat 107
One-component clear is the final layer on wood surface. Application method is conventional spray.
Features
  • Very fast-drying
  • Glossy
 
 
Waxed Polyester Resin WO-300
Three component waxed polyester resin should be applied by means of conventional spray; then the final paraffin layer should be sanded and polished.
Features
  • High dry film thickness
  • High gloss
  • Scratch resistance
Application Method
Mix 500CC of resin with 1 scale (16CC) of cobalt thoroughly. Then, add 1 scale (72CC) of Peroxide and apply immediately with spray gun. Add styrene monomer to thin the mixture, if needed.
 
 
Non-waxed Polyester Resin WO-350 & WO-400
Three-component non-waxed polyester resin should be applied by means of conventional spray.
Features
  • High dry film thickness
  • High gloss
  • Scratch resistance
Application Method
Mix 500CC of resin with 1 scale (16CC) of cobalt thoroughly. Then, add 1 scale (72CC) of Peroxide and apply immediately with spray gun. Add styrene monomer to thin the mixture, if needed.
 
Wood PU Clear Coat (upon order)
Two-component PU clear should be applied by means of conventional spray.
Features
  • Excellent resistance against humidity
  • UV resistance
  • Glossy
 
 
Wood Alkyd-Urethane Clear Coat 1831
One-component clear 1831 should be applied by means of conventional spray along with synthetic thinner.
Features
  • Humidity Resistance
  • Glossy

 
Yashm paint & Resin IndustriesFlat. No12. 65th Alley. Asadabadi St.Tehran, Iran P.O. BOX : 1434965311 Tel: +98 21 88065665 Fax: +98 21 88213967